Φορτιστής SkyRC NC2500 Pro AA/AAA


Κωδικός προϊόντος: IP-006503 Κατηγορία:

Επιπλέον πληροφορίες

Βάρος0.98 kg


12 μήνες

Παράδοση σε 4 - 10 εργάσιμες ημέρες


SkyRC NC2500 Pro AA / AAA charger

The SkyRC NC2500 Pro charger allows not only charging AA and AAA batteries, but also regenerating them. The device offers several different modes of operation, and has the added advantage of a run-in function that allows you to run-in model motors that have not been used for a long time. You also have a USB port that supports QC 3.0 fast charging, and the charger is equipped with 6 battery slots.

As many as 4 available features

The NC2500 Pro offers as many as 4 modes of operation. This way you can not only charge the batteries of your choice, but also discharge or regenerate them. In this way you will extend their life! A brake-in function is also available. All this will allow you to optimize the operation of your batteries, take care of their condition, and even protect them from wear and tear or damage!

Charge 6 batteries simultaneously

With the NC2500 Pro you can charge up to 6 batteries simultaneously. The device is equipped with 6 slots and offers a maximum current of 2.5A. The charger also offers a special Step Charging mode, which allows you to adjust the amperage for successive charging steps. So you can take even better care of the condition of your batteries and enjoy their optimal performance!

Easy operation

Convenient operation of the device is enabled by a special dial. The charger is also equipped with an easy-to-read display, so you can check the current amperage, voltage and capacity for each channel at any time. On the screen you will also find information about the current operation mode and elapsed time. Just take a look!

Effective protection against overheating

Don't worry that your battery will overheat and be damaged. The charger uses an innovative FlexiPulse algorithm that prevents similar problems! When the device detects that the cell's internal resistance increases above a certain level during charging, it will automatically reduce the amperage to maintain the right temperature. In this way, it will protect the battery from overheating!

Run-in function

The NC2500 Pro is more than just a charger. The device offers an additional run-in function. It allows you to run-in model motors that have not been used for a long time. In this way you will prepare them for the next races and gain confidence that they will not let you down! Bet on proven solutions and achieve better and better results.

Additional USB port - fast charging

With the NC2500 Pro charger you can also charge your phone in a short time. The device is equipped with an additional USB port and supports QC2.0 / QC3.0 fast charging. It also provides voltage and current at 5V / 3A and 9V / 2A. This makes the charger perfect for a variety of scenarios. You no longer have to wait too long for your smartphone to be ready for use!

In the box

  • BD350 battery discharger / tester
  • XT60 connection cable
ModelNC2500 Pro
InputDC 12V / 3A
Battery typeNiMH / NiCD
Battery sizeAA / AAA
Charging intensity0.1-2.5A
Discharge current0.1-1.5A
Discharge cutoff voltage0.8-1.0V (adjustable)
USB outputQC3.0 5V / 3A, 9V / 2A, 18W max ±5% - △V: 1-8mV (adjustable)
Current (trickle)30-99mA / OFF
Temperature protection55-65°C (adjustable)
Operating temperatureFrom 0°C to 40°C
Ambient humidity during operation0-75%
Storage temperatureFrom -10°C to 70°C
Ambient humidity during storage0-75%
Dimensions148 x 135 x 65mm

Αν έχετε κάποια απορία σχετικά με τον προϊόν, μπορείτε να χρησιμοποιήσετε την παρακάτω φόρμα επικοινωνίας. Θα χαρούμε να σας εξυπηρετήσουμε!

Product Form
© 2021, All Rights Reserved
icon-angle icon-bars icon-times

Filter Search Results


linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram